Wallys industrial 2x2 2.4G&5G router/QCN9074 WiFi 6E Card OpenWRT, IPQ6010,802.11ax
We developed and designed the industrial router/industrial moudle/industrial antenna.
The chips are mainly Qualcomm and MTK.
At the same time provide customized services.
Qualcomm-Atheros IPQ6010
Quad-core ARM 64bit A53 @1.8GHz Processor
1GB DDRL3L System Memory
32MB NOR Flash, 256MB NAND Flash
Supports Dynamic Frequency Selection (DFS)
- 本文地址：Wallys industrial 2x2 2.4G&5G router/QCN9074 WiFi 6E Card OpenWRT, IPQ6010,802.11ax
- 本文版权归作者和AIQ共有，欢迎转载，但未经作者同意必须保留此段声明，且在文章页面明显位置给出
2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate
2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate
Support: QUECTEL RM500Q-GL
Support: QCN9074 WiFi 6E Card
| Absolute Maximum Rating |
|---|
| Parameter | Rating | Unit |
|---|---|---|
| Supply Voltage | 24V~48 | V |
| Operating Temperature Range | -40 to +70 | ºC |
| Storage Temperature Range | -45 to +105 | ºC |
| Operating Humidity Range | 5 to +95 (non-condensing) | % |
| Hardware Specifications |
|---|
| Symbol | Parameter |
|---|---|
| CPU | Qualcomm-AtherosIPQ6010 |
| CPU Frequency | Quad-core ARM 64 bit A53 @1.8 GHz processor |
| System Memory | 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design |
| Ethernet Port | 1x 1Gbps Ethernet Ports & POE3x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port |
| NGFF Slot | M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0 |
| SD Card Slot | 1x SD Card Slot |
| USB /header | 1x USB 2.0 Port |
| POE | 24V~48V passive POE/Active POE(Suport 802.3bt) |
| DC Jack | 24V power supply |
| LED header | FFC/FPC Connector |
| Serial Port | 1x Serial Port 4 Pin Connector |
| Wireless | On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/802.11g/802.11n/802.11ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain4 x MMCX Connectors |
| Bluetooth | optional |
| Nor Flash | 8-32MB(normally is 8MB) |
| Nand Flash | 256MB |
| DDR | 1GB |
| Dimension | 185mm x 116mm |
| Radio TX Specifications(5180MHz-5825MHz) |
|---|
| Operating Mode | Data Rate | Power | Tolerance |
|---|---|---|---|
| 1 Chain | 2 Chains | ||
| 5Ghz 802.11ax HE20 | MCS0 | 20dBm | 23dbm |
| MCS1 | 20dBm | 23dBm | ±2dB |
| MCS2 | 20dBm | 23dBm | ±2dB |
| MCS3 | 20dBm | 23dBm | ±2dB |
| MCS4 | 19dBm | 22dBm | ±2dB |
| MCS5 | 18dBm | 21dBm | ±2dB |
| MCS6 | 17dBm | 20dBm | ±2dB |
| MCS7 | 16dBm | 19dBm | ±2dB |
| MCS8 | 15dBm | 18dBm | ±2dB |
| MCS9 | 14dBm | 17dBm | ±2dB |
| MCS10 | 13dBm | 16dBm | ±2dB |
| MCS11 | 13dBm | 16dbm | ±2dB |
| 5Ghz 802.11ax HE400 | MCS0 | 20dBm | 23dbm |
| MCS1 | 20dBm | 23dBm | ±2dB |
| MCS2 | 20dBm | 23dBm | ±2dB |
| MCS3 | 20dBm | 23dBm | ±2dB |
| MCS4 | 19dBm | 22dBm | ±2dB |
| MCS5 | 18dBm | 21dBm | ±2dB |
| MCS6 | 17dBm | 20dBm | ±2dB |
| MCS7 | 16dBm | 19dBm | ±2dB |
| MCS8 | 15dBm | 18dBm | ±2dB |
| MCS9 | 14dBm | 17dBm | ±2dB |
| MCS10 | 13dBm | 16dBm | ±2dB |
| MCS11 | 13dBm | 16dbm | ±2dB |
| 5Ghz 802.11ax HE80 | MCS0 | 20dBm | 23dbm |
| MCS1 | 20dBm | 23dBm | ±2dB |
| MCS2 | 20dBm | 23dBm | ±2dB |
| MCS3 | 20dBm | 23dBm | ±2dB |
| MCS4 | 19dBm | 22dBm | ±2dB |
| MCS5 | 18dBm | 21dBm | ±2dB |
| MCS6 | 17dBm | 20dBm | ±2dB |
| MCS7 | 16dBm | 19dBm | ±2dB |
| MCS8 | 15dBm | 18dBm | ±2dB |
| MCS9 | 14dBm | 17dBm | ±2dB |
| MCS10 | 13dBm | 16dBm | ±2dB |
| MCS11 | 13dBm | 16dbm | ±2dB |
We have experienced R&D engineer team with a demonstrated history of working in the wireless industry. Skilled in RF and embedded communications , network protocol, firmware ,openwrt ,linux system development , analog and Digital Circuit Design, Network Processors, Power supplies ,PCB design and layout and etc.,
Many years of expertise in software and hardware design allow us to deliver solutions based on your specification list for commercial and industrial applications. We are able to think ahead and deliver design that meet and exceed customer requirement.
Skype/ EMAIL:sales@wallystech.com
WEB: https://www.wallystech.com/
Youtube： https://www.youtube.com/channel/UClmu7LBz_OWxe2VckkQr3tw
注意：本文归作者所有，未经作者允许，不得转载
